black flakes in water

Black Flakes in Water: Causes, Effects and Prevention

Are you noticing black specks in your water? Learn more about the 6 common causes and how to stop black flakes in your water for good!

Quick Summary

Black flakes in your water can be caused by mineral deposits, old and corroding pipes, worn-out rubber parts, sand and silt, and water filtration systems. Mineral deposits consist of small amounts of iron or manganese, which can be found in the water. Over time, excessive use can wear down your pipes, causing them to corrode, which can lead to black flakes in the water. Additionally, rubber parts in the water system can become worn out and create black specks. Sand or silt, which can find its way into the water supply, can also create the same issue, as can some water filtration systems that do not filter small enough particles.

The effects of black flakes in your water can be far-reaching, depending on the severity of the problem. It can turn your water an unsightly black or brown color and also cause other impurities that can leave it tasting and smelling bad. It can even cause consuming your water to be potentially hazardous in some cases. Fortunately, there are several things you can do to prevent black flakes from entering your water.

The most effective solution is to install a water filtration system. Most water filtration systems should be capable of filtering out particles that cause black flakes in the water. Additionally, you should also check your pipes and rubber parts on a regular basis to ensure that they are not wearing out. Replacing any damaged parts should help to reduce corrosion and sediment buildup. Finally, you should also avoid using abrasive cleaning chemicals that can damage the pipes, which can cause black flakes.

How to Identify, Treat and Prevent Black Flakes in Water

Common Causes of Black Flakes in Water

Nobody wants to find black flakes in their water. That being said, understanding what is causing the flakes can be key in treating them. The 6 most common causes of black flakes in water include:

  • Mineral deposits
  • Old pipes
  • Corroded water heater
  • Worn-out rubber parts
  • Sand or silt
  • Water filter

How to Identify Which Causes are Present

In order to identify which of the causes is present with your black flakes, you will first need to assess the color and texture characteristics of the flakes. Specifically, the black particles of metal can be fine or coarse, and will usually appear as black specks, grains, or flakes. Further, if the flakes appear when hot water runs, the likely culprits will be the corroded water heater, old pipes, and/or worn-out rubber parts.

Treatment Options

The suggested treatment option will depend on the identified material causing the black flakes. Some of the most common items associated with black flakes are iron, magnesium, and zinc. In the case of most metal particles, the easiest solution is to install a water filter which will filter the metal out of the water. Finally, the most extreme treatment option would be to have a professional inspect, diagnose, and repair both the water heater and pipes.

Preventing Future Problems

In order to prevent future problems, it is suggested that you maintain a regular schedule for water heater inspections, install water filters, and repair or replace any worn or corroded pipes or water heaters. That being said, it is suggested to schedule inspections and maintenance every six months, and to replace filters at least once a year.

Personal Experience

  How to Identify, Treat and Prevent Black Flakes in Water

I recall an incident several years ago when a customer called me looking for help in resolving an issue with their water. Upon visiting the property, I discovered black specks floating throughout their water. After examining the issue carefully, I was able to identify the cause of the black flakes as mineral deposits. Through a process of examining the pipes, water heater, and rubberwear, I was able to assess that the mineral deposits had built up over time due to old, corroding pipes. After replacing the corroding pipes, the customer was able to get rid of the black specks and once again enjoy fresh, clean running water.

Frequently Asked Questions

Why are there black flakes in my water?

Black flakes in drinking water are usually caused by degrading parts of the internal plumbing. These particles are similar in size to cracked pepper, stick and smear on surfaces, and don’t dissolve in water. To identify the source of the problem, it is recommended you consult a professional plumber.

Are black specks in water safe?

Yes, black specks in water are generally safe. These small traces of minerals are usually harmless to your health. However, it’s recommended that you have your water tested to make sure the mineral levels are within safe limits.

What’s the black stuff that comes out your water?

The black stuff that comes out of your water may just be trace amounts of iron or manganese minerals. These minerals are generally harmless, but it’s always a good idea to have a water test done to accurately measure mineral levels. To ensure the safety of your drinking water, get a water test to check mineral levels.

How do you get rid of black specks in water?

Answer: To get rid of black specks in water, first replace the water filter cartridge. If this does not work, it is likely that sediment build-up in the home’s pipes is causing the issue. To address this, contact a professional for proper cleaning or pipe replacement.

Why is there black specks in my bath water?

Black specks in your bath water are likely a sign of corrosion in your pipes. This corrosion can lead to hidden leaks and other plumbing issues. It is important to call a professional plumber as soon as possible to inspect the pipes and potentially perform partial repiping.

Why is black stuff coming out of my bathtub faucet?

Black slime around bathtub faucets is caused by oxidized manganese and harmless bacteria that feed off the minerals in the water. This slime is usually the result of manganese found in the water, which is common in many areas of the United States. To prevent black slime from forming, use a water filter to remove the manganese and other minerals.

Why do I have black particles coming out of my faucet?

Black particles coming out of your faucet could be a sign of pipe corrosion in your home. It’s a good idea to call a professional plumber to inspect the pipes, as they may need to be partly replaced. Left untreated, corrosion can lead to hidden leaks which can cause damage to your home and potentially to your health.

Why are there black specks in my tub?

Answer: “Black specks in your tub are likely caused by a corroded anode rod in your water heater. The anode rod is made of magnesium or aluminum to protect the water heater tank from corrosion. As the anode rod corrodes, it creates black residue that ends up in your tub.”

What causes black specks in water?

Black specks in water can often be caused by the presence of iron and/or manganese in the water system. These minerals, while harmless to ingest, can cause an unaesthetic appearance, as well as stain plumbing fixtures, laundry, and dishes. In short, mineral traces are the main cause of black specks in water.

What causes black sediment in well water?

Black sediment in well water is commonly caused by minerals, soil or mud, organic matter, and iron and manganese. In most cases, treatment can be done by installing a water treatment system and getting the well repaired, if necessary. Effective treatments can help reduce or remove staining on plumbing, fixtures, and appliances.

Why is there black stuff in my faucet?

The black material in your faucet is either rust or bacteria due to hard water. It is caused by bacteria eating at the oxidized manganese and other minerals. This can alarm some when it is their drinking water.

Why does my filtration system look like black specks?

If you notice black specks in your water, it likely means that your filtration system is using granulated activated carbon (GAC). This carbon looks like little black specks and can end up in your water if the filtration system is having issues. If the specks look rubbery or metallic, then a broken part is likely to blame.

Final Thoughts

While there can be a few possible causes of black flakes in water, it is important to determine the specific source of the issue so appropriate action can be taken to prevent further damage and make the water safe for consumption. Common causes of black flakes in water may include mineral deposits, old pipes, corroded water heater, worn-out rubber parts, sand or silt, and water filters. It is important to contact a professional to handle any of these potential problems as soon as possible to ensure a quick and successful resolution. With proper monitoring and inspections as well as preventative maintenance, people can be alerted to any potential problems with their water supply and ensure that they are able to continue to use it safely.

Resources